RV Roof Leaks? Liquid Roof Sealant Can Help!

Your RV is an important investment. It provides you with freedom and enjoyment, the ability to go where you want without having to worry about renting a hotel room, and more. It’s an incredible experience to own one. However, many owners find that their experience is eventually tarnished by a roof leak.

RV roofs are not like the roofs of residential homes – they’re thin and light and designed to provide protection while being easily mobile. They can be compromised by many things, ranging from falling tree branches to too much sun exposure. Thankfully, Liquid Roof sealant can help get you back on the road once more! Here’s what you need to know about fixing that RV roof leak with Liquid Roof.

Locate the Leak

First, you’ll need to locate the leak. This will require a visual inspection. It is often best to start inside the RV – look for signs of water leaks on the ceiling and the walls. These will appear as dark stains, often reddish or brownish in color. Once you’ve found such evidence, there is a good bet that the leak is somewhere nearby. However, that does not necessarily mean that the leak is directly above the stain, as water can leak through the roof membrane, and then run for a distance along the underlayment before it finally leaks into the interior.

Once you’ve found evidence of a leak, you’ll need to get topside. Many RVs have a ladder built into them for just this purpose, but if yours doesn’t, you’ll need to get a tall, steady ladder so you can climb on top. Here, you’ll need to carefully inspect the roof for signs of damage. It might be something obvious – a branch puncture through the roof membrane, for instance.

However, it might be something less conspicuous. Many times, small leaks around flashing and other rooftop seals can translate into big damage within the interior. Check for any loose flashing, or areas of damage around vents and the like. It could also be a leaking seam on the roof.

Repair the Leak

Once you’ve found the leak, it is time to begin the repair process. With Liquid Roof sealant, it should be quick and effective. Here are the steps you’ll need to follow:

  • Get your tools together. You’ll need cleaning supplies, as well as a paint roller or brush to apply the sealant. You will also need a razor knife. If you need to remove any old caulking, you’ll also need a scraper.
  • Next, you’ll need to cut or scrape away any silicone caulking. If there is a puncture through the roof, you’ll need to trim the edges so that they are not ragged.
  • Third, you must clean the roof. It must be practically spotless for the repair to work, so you will need a scrubbing pad and a good cleaner to remove dirt and debris.
  • Once you have the entire patch area clean, you can apply the Liquid Roof sealant. Roll it on in a single smooth coat and allow it to dry. It should be dry to the touch within minutes and it is waterproof as soon as you apply it. However, it will take time to cure completely.
  • When the patch has cured, test the repair with a water hose to make sure that the leak has been alleviated.

There you have it – simple, effective steps to repairing a minor RV roof leak with Liquid Roof sealant. As a note, you can repair larger sections with Liquid Roof, as well, up to re-roofing over the entire membrane if necessary, although you’ll have additional prep work for that.

RV Maintenance 101: Calculating Your RV Roof Reseal Cost

RVs are a unique creation: part vehicle, part living space, and all of it requires routine maintenance and care that can be quite different from that of a car or a permanent structure. Even mobile homes, which are often similar to RVs in roofing materials and styles, still use different products and materials. That’s why the first step on your RV maintenance checklist should be to educate yourself on the proper materials and methods for handling things like the roof of your RV.

Resealing an RV roof is a standard part of maintenance that can give your roof years of additional life. Those who have EPDM rubber roofs don’t need to worry about this process because EPDM roofs are maintenance-free when applied correctly, aside from the occasional washing. Over time, however, it may be necessary to fill in cracks, replace worn or damaged seals, or even reseal the entire roof for a fresh start. The cost of the process will vary significantly, depending on a number of factors.

Do It Yourself to Save

Professional RV shops and dealerships do provide a number of maintenance services, including resealing. However, most places will charge over $1,000 for the job, with larger RVs requiring an estimated $1,500 to $2,000 for a full reseal. You can cut your RV roof reseal cost significantly by doing the work yourself. If you have the time, the tools and materials that you need are reasonably affordable on their own. Keep in mind that with the estimated costs provided here, the majority of the charge is in labor (many shops and dealerships charge $80-$100 per man hour). Doing the work yourself can cut the bill down to about 1/3 of what they charge.

How Big is Your RV?

As mentioned above, the larger the RV, the larger the cost of maintenance services like resealing. Even if you do the work yourself, your RV roof reseal cost is going to be affected by how big of a roof you have to reseal. Also factored into this is the style of RV roof you have, as well as how many fixtures are on it. If you’re dealing with a vent, air conditioner, satellite dish, skylight, and every other possible roof fixture, you are going to spend a lot more time and money on the sealing process, regardless of who does the work.

Don’t Cheap Out

Keep in mind that you get what you pay for with RV resealing, as with any professional service. This is a laborious process that involves removing all of the old sealant. That part can take hours, because a careful hand is required to remove the caulk or adhesive without damaging the fixtures or the roof itself. Remember that while a quote might seem expensive, these people really are putting in a lot of work.

On the same hand, when you do the work yourself, you have to do it right. You could save a lot of time by just caulking over the old seals, but that isn’t doing anyone any favors. All that will do is make it even harder to scrape and prep whenever you finally do get around to resealing the entire RV roof. You might spend 15 or 20 hours prepping and resealing your own roof, but you can save a fortune on labor costs and know that the job is done right.

There are a lot of elements that go into determining the average RV roof reseal cost. Materials, the size of your RV, and who is doing the work are going to have the biggest impact. Be sure to ask around and find out what others in your area are spending, and how they are saving, by making the most of DIY roof resealing.

Why More RV Owners are Considering Liquid Roofing

Rubber has been used as a roofing material for RVs for over 25 years. It provides a durable, flexible surface that can add strength to the seals around seams and fixtures, and it is much more affordable and easy to install than other roofing materials. To increase the benefits and convenience of this material, EPDM liquid roofing was developed. This liquid possesses all the qualities of EPDM sheeting membranes, but when it dries it provides a more flexible, durable finish.

Liquid Roofing Dries White

Although choosing a roof material is about more than aesthetics, it does matter. In fact, it matters a lot to many RV owners who avoid rubber roofing because they assume that it will be black. Not only is this not as visually appealing on a white or off-white RV, but it can attract more heat and doesn’t offer as much energy efficiency, despite its strong, durable sealing power.

However, liquid roofing products have been uniquely formulated for this exact reason. The formula goes on as a black liquid, but as it dries and cures, it turns white. The white finish will reflect heat and harmful UV rays, and offer a better-looking finish on RVs of a similar color scheme.

Liquid Roofing Offers Full Protection

Liquid EPDM is engineered to protect your RV from more than just UV rays. In fact, this product can resist ozone elements, freezing and extreme heat, snow, acids and alkalis, and even saltwater. No matter what climate you live in or where you take your RV, you can trust that your roof will be better protected with a liquid product than other roofing materials. Plus, the liquid will get into every single crevice and crack on your roof, ensuring a watertight seal across the entire surface.

In case that isn’t enough, liquid roofing has self-leveling properties. While you do have to spread it during application, you don’t have to worry about getting it perfectly even. It will finish leveling out as it dries, giving you a flat surface that won’t be prone to pooling water and other potential damage or leaks as a result of an uneven application.

DIYers Love the Easy Application

If you’re looking for a weekend project for your RV, a new roof or roof coating could be a great choice. With liquid roofing, it’s as easy to apply the coating as it is to paint a wall. Using a brush, roller, or squeegee, you can apply the liquid product in a short amount of time and let it air dry for a full cure in less than 24 hours. Plus, this convenient material can be applied to almost any surface. So long as the surface is clean, liquid roof can be applied to:

  • Fiberglass
  • Sheet Rubber
  • Fabric
  • Plywood
  • Metal or Aluminum

The liquid roof will cure to a flexible finish on any of these surfaces, providing optimal protection and easy application regardless of your existing roof material.

The Bottom Line: The Bottom Dollar

Perhaps the most popular reason that people choose this option for their RV is how cost-effective it is when compared to other roofing options. The cost of replacing your roof can vary significantly depending on a number of factors, but you can typically expect to pay a repair shop around $300 per linear foot to replace other types of RV roofing.

Liquid roofing, on the other hand, can be done in a matter of hours by anyone with basic painting skills. A gallon of liquid EPDM ranges from $50-$100, and will cover as much as 45 square feet. Depending on the size of your RV, you can get the job done for a couple hundred bucks over the course of a weekend.

RV Roof Replacement: Know When Your Roof is Beyond Repair

For the most part, choosing whether to repair or replace your RV’s roof is a personal preference. However, there are going to be some situations when a full RV roof replacement presents the better, or even necessary, option. Knowing when that is can save you a lot of stress and help you avoid causing further damage to your RV’s roof and the structure underneath.

Here are some signs that your roof is probably ready for replacement, rather than another repair:

  • The repair is more expensive than a replacement. Although obvious, this is the primary reason that owners choose an RV roof replacement as opposed to a repair. After all, you are looking for the most affordable way to protect your investment. If a new roof is cheaper, it doesn’t make sense not to go that route.
  • The damaged area is too extensive. This is slightly subjective. However, if the damage on your roof covers more than 30% of the roof, it might be in your best interest to at least get quotes on a full replacement. If you aren’t certain, you can get an estimate from the professionals. You don’t have to let them do the job, but they can give you an idea of the costs involved and which option is better.
  • The structure underneath the roof or the fixtures (such as vent fans or hatches) are damaged. In this situation, you can’t really repair the areas that need it without removing the old roofing material first. Therefore, a replacement is the only thing that makes sense.
  • The age of the roof is a good indicator. A roof that is only 10 years old, for example, might be fine to repair even if the damage is significant. A 20-year-old roof, on the other hand, will be better to replace regardless of what repairs are needed. Most RV roofs last a maximum of 25 years, so keep that in mind when considering your options.
  • Whatever damage or issues your roof is facing require a long-term solution. Repairs are typically a short-term solution, and may not always get the job done. You might think you are saving money by doing a small repair now, but when you have to repair it every six months, you might think again. In this situation, a replacement offers a better long-term solution for any kind of roof damage or deterioration.
  • You already have multiple layers of roofing materials. Although it is usually fine to have a layer or two of rubber roofing and/or sealants on an RV, you don’t want too much to build up. This can put unnecessary strain on the roof and add too much weight to the vehicle. If you’ve already done a lot of repairs or cover-ups, it might be time for a full RV roof replacement.

Replacement Time: Consider New Materials

Humans are creatures of habit. If their RV has a rubber roof, the chances are high that they will look specifically into a rubber roof replacement. Although there are multiple types of roofing materials available for RVs today, people are not always aware of all of the options. Do yourself a favor since you are replacing the roof anyway, and explore the materials available to see which ones best suit your needs.

A popular option for versatility, convenience, and durable longevity is the liquid rubber roof. This product is easy to apply, levels itself during application, and will air-dry to a flexible, watertight seal in a matter of hours. Plus, it adds an extra layer of protection around seams and fixtures that you don’t get from materials like fiberglass or TPO, which are much more solid, sheet-like products.

Regardless of what you choose, trust that you are making a solid investment in your RV by replacing the roof when it is necessary. There is a time and place for minor repairs, but they might not always do the job. Keep these tips in mind when deciding what to do with the roof on your RV.

Are You Planning on Doing RV Roof Waterproofing?

The weather is starting to get nice and you’re beginning to get the itch. It’s time to get the RV ready for another season of camping. You always perform a thorough inspection before and after each season, and today, you noticed that the roof is looking a little rough. It’s been years since you’ve done anything to the roof, so maybe it’s time to do some RV roof waterproofing. What’s the first step?

Are You Planning on Doing the RV Roof Waterproofing Yourself?

The first thing that you’re going to want to consider is whether you’re comfortable going up onto the roof and doing the work yourself. There’s no shame in hiring a competent roofing professional to do the job for you. Most of them are insured and will guarantee their work, and because the area of an RV roof is relatively small, the cost of hiring someone shouldn’t be too high. Many of them will allow you to supply the materials, so you can shop around and take advantage of sales promotions, further reducing your costs. If you do decide to do the job yourself, please be careful! Falling from the roof of an RV can cause serious injury or even death. RV roof waterproofing is not a complicated process and can usually be done on a weekend, weather permitting.

Which Waterproofing Sealant to Choose

When choosing an RV roof waterproofing material, there are a number of factors to consider, such as the material that your roof is made of and how you use your RV. Most RV roofs are made from either metal, fiberglass or EPDM synthetic rubber, so be sure to choose a waterproofing material that will work on your unit. Liquid rubber sealants work effectively on most RV roof surfaces, which makes them a popular choice for do-it-yourselfers. You may not think that the way in which you use your RV is a factor when choosing an RV roof waterproofing material. If your unit is parked at a camp ground year round, a liquid rubber sealant will give you the protection that you need. An RV that is constantly moving around will require a liquid roof material because it will better tolerate movement.

Wash, Rinse, Repeat

An RV roof waterproofing material will adhere well only if the underlying surface has been thoroughly cleaned, so it’s time to get out the bucket and brush. Before washing the roof, sweep or blow off all of the debris and loose material. You can wash the surface with warm soapy water; ordinary soaps should work fine. Scrub the roof well with a brush, removing all dirt and mildew. Next, rinse it thoroughly; you can use a pressure washer or garden hose. If you can’t seem to get the results that you want with regular soaps, there are cleaners specifically designed to clean RV roofs. Some detergents can leave a film behind which will keep the rubber sealant from adhering properly, so the point about rinsing thoroughly can’t be over-stated.

Applying the Sealant

It’s probably taken hours to sweep and clean the roof’s surface and now you’re ready to apply the sealant. Some people don’t do the work themselves because they think that it will be too difficult. The reality is, if you can paint a wall, you can seal your RV roof. Start by applying the sealant around the vents with a brush, and then do the rest of the roof with a medium nap roller. Let it dry and you’re ready for a summer of fun. Happy camping!

Some RV Roof Sealant Tips for You to Consider

When it comes to maintaining their RVs, many people confuse time-consuming with difficult. Properly maintaining your coach, if done on a regular basis, is not that difficult, but can take a bit of time. Most RV owners however, are more than willing to expend both the time and effort required to keep their unit in great condition, because they realize that their RV represents a large financial investment from which they derive enormous pleasure. The part of every RV requiring the most scrutiny, whether the camper is always on the road or parked at a campground year-round, is the roof. That’s because the roof is the part that is most susceptible to damage from the elements, and just as importantly, any failure in the roof’s integrity will eventually translate into damage in another part of the trailer’s structure.

RV Liquid Roof

RV Liquid Roof

The Most Important RV Roof Sealant Tip is: Safety First.

It’s only natural to want to save money, and doing your own scheduled maintenance on your RV roof can save you a lot. However, and this is important, if you’re not comfortable working on the roof, please hire a professional. You’re not going to do your family any good or save money if you get hurt from a fall. Most professionals are licensed and insured and will warranty their work. Having said that, if you’re confident that you can safely do the roof sealing work yourself, you will save a significant amount of money that can be spent on other things.

Take Your Time When Performing the Inspection.

Another important RV roof sealing tip is to take your time when doing the inspection on your roof. If done properly, a roof reseal with the correct products will last for many years, so it’s important to take the time to make sure that every area is examined before proceeding. Check along the outside edges of the roof and look for any separations in the seam material. Pay particular attention to the caulking around all of the roof vents, looking for cracks and peeling. If you have to repair any areas, be sure to use a caulk that is specifically designed for use under a liquid EPDM rubber roof sealant.

Choose the Right Product for the Job.

You’re familiar with the phrase; ‘penny wise and pound foolish’. That phrase refers to people who buy inferior products that aren’t meant for a particular job, thinking that they’ll save a few dollars. What inevitably happens is they end up spending more in the long run when they have to redo the whole thing. Most people today are using EPDM type sealants on their RV roofs because they are fairly easy to apply, don’t require professional installation, can be installed in a weekend and provide long-lasting results on a variety of roof surfaces like metal, fiberglass and rubber.

RV Roof Sealant Tips Thee Ps

Don’t forget about the three Ps of RV roof repair and sealing; prep, prep and prep. Even if you choose the top-of-the-line liquid EPDM rubber sealer that only requires one coat, you still need to make certain that all repairs have been made and the surface is really clean. If any dust or detergent film remains on the roof’s surface, it could keep the liquid roof sealant from adhering properly. The little bit of extra time that you spend now doing the job properly, will pay huge dividends down the road when you’re able to enjoy your RV without having to worry about damage from a leaky roof. Happy Camping!

Using an RV Liquid Roof Treatment

Your RV is a Big Investment

After your house, your RV is perhaps the biggest investment that you will ever make. It’s your home away from home when you’re on the road, and just like your house, you want your RV to be clean, comfortable and trouble-free. Regular inspection and maintenance play a big part in keeping it that way. The single biggest factor in keeping your coach in good shape is the condition of the roof. An RV roof is subject to the worst that Mother Nature has to offer; rain, sleet, snow, hail, and wind; the list goes on and on. Over time, the integrity of the roof’s surface deteriorates and small defects will appear. If left untreated, these seemingly minor flaws can develop into much bigger damage which will spread to other parts of the RV and compromise the structural integrity of the unit. Detecting and fixing problem areas of the roof when they first appear by using an RV liquid roof treatment can help ensure that you will enjoy many years of trouble-free camping.

RV liquid Roof

RV liquid Roof

Perform Regular Inspections

Thoroughly inspect the surface of your RV roof at the beginning and end of each season. If you’re using your coach for extended periods of time, a monthly inspection is warranted. If you don’t feel comfortable going up on the roof yourself, it is best to hire a professional. Look for minor cracks or splits in the roof’s surface. Inspect around the outside seams, taking special note of any separations. Check around all roof vents, antennae and the air conditioning unit. Are there any splits in the caulking? Does it appear to be pealing? Take your time when doing the inspection and never adopt the attitude that a problem isn’t that bad, that it can wait. Any defect in the integrity of the roof will only get worse over time. The sooner the problems are addressed, the easier and less expensive they’ll be to fix. After you’ve identified the areas that need to be treated with an RV liquid roof treatment, it’s time to prepare the surface.

Preparing the Problem Areas

Before you can apply an RV liquid roof treatment, the roof must be prepped. Start with a thorough cleaning of the surface. All loose dirt and debris must be swept or blown off of the roof. Next, thoroughly scrub the surface of the roof. You can use regular soaps as long as they don’t contain any petroleum or citrus products. It’s extremely important to thoroughly rinse the soaps and cleaning solutions, as any remaining residue can keep the RV liquid roof treatment from adhering properly.

Choose the RV Liquid Roof Treatment That’s Right for You

It is recommended that you use RV liquid roof treatment for a number of reasons. After several years, the surface of the roof isn’t going to be perfectly flat, especially if any repairs have been made to it. A liquid will fill in and coat even the smallest splits, cracks and defects. Also, a liquid will cover and coat any raised surface areas like repair sites, the caulking around the base of vents and antennae, or the lip around the roof’s edge. If you’re only sealing smaller repair areas, be sure to overlap the edge of the repair by about 3 inches. Lastly, because repair and prep work can be time intensive, you’ll be wise to use an RV liquid roof treatment that only requires one coat. It’ll save you hours of time that would otherwise be spent waiting for a first coat to dry.

Coat the Mobile Home Roof With a Quality Product

Do you have a mobile home or RV? Naturally, you want to make sure that it has protection from the elements and that it will last a long time without giving you any headaches. Having a coating for the roof will provide you with a layer of protection that can help to ensure you do not have to worry about problems with it. The best option available is called RV Liquid Roof, and it offers some fantastic benefits.

Prolong the Life of Your Roof

You will find that using a permanent RV roof coating such as this will allow you to add to the longevity of your roof. Where some roofs might get to the point where they will start to crack or have leaks in them, this coating can provide you with an additional 20 years of protection. This means less worry on your part.

RV Liquid Roof

RV Liquid Roof

Works With All Roof Materials

One of the other reasons you will want to choose RV Liquid Roof is because it is capable of working with many different types of roofing materials. This includes wood, metal, and concrete. Since most RVs have a metal roof, you will not have to worry about it not adhering properly. This product was built specifically to work with RV roofs.

Resistant to Temperature Changes

Another nice feature of the coating is that it is capable of resisting damage from temperature changes. Those who live in environments with extreme temperatures that might cause lesser coatings to expand too much and not return to shape, or that might cause them to crack from being too cold, will not have to worry. This coating can expand and shrink with the temperatures, still providing you with the longevity and the protection you need.

Cheaper Than Replacing the Roof or Other Parts of the Mobile Home

Take a moment to think how much it will cost to replace the roof of your mobile home or RV. That alone is likely to cost many thousands of dollars that you might not have. If there are leaks that have already caused damage to other parts of the unit, the cost of repairs is going to be much higher. Most people do not have extra thousands lying around to make these types of repairs. Therefore, it simply makes more financial sense to take preventative measures and coat the mobile home roof now.

It Is a DIY Product

Another way that you will be saving money when you use RV Liquid Roof is through the application itself. You do not need to hire a professional to do it for you. It is very simple to do and requires very few materials. After cleaning the roof, it should not take long at all to get the coat on your roof. It goes on like paint, so you will need a roller and a paintbrush. You only need to add a single coating, as well, so you should be able to get the entire roof done in a couple of hours at most. Once it is on, it begins to provide you with protection almost immediately.

Less Maintenance

Not only will you have the added peace of mind when you have a permanent RV coating on your roof, but you will find that the roof itself will generally require less maintenance. You will still want to make sure that you keep the roof clean and that you inspect it during those cleanings. You shouldn’t have any issues, though.

With all of these benefits, it is easy to see why you need a coat for your mobile home roof. It is a fantastic way to add some protection to your investment.

How to Conduct RV Repair with Liquid Roof

The point of owning an RV is to have a roof over your head wherever you travel. But what happens if that RV roof starts to leak? Well, then your days of thunder, travelling the open road could hit a snag. If you’ve discovered that your RV roof has sprung a leak, then it’s important that you take immediate action with respect to making repairs. Fortunately, making repairs to your RV roofing system is easy thanks to a helpful little compound called liquid roof, which can be easily applied to problem areas!

Mistakes To Avoid With Liquid Roof

As with any other kind of repair work, it’s important that you take care when applying liquid roof to your RV’s roofing system. First, you’ll want to make sure that liquid roof is the appropriate solution for your RV roofing system. If you have an EPDM based roofing solution for your mobile home, then you’re in business. If you have a different kind of roofing solution, then you’ll have to look elsewhere!

One of the biggest mistakes you can make when applying liquid roof to your RV is failing to clean adequately before you do so. Like the EPDM roofing itself, the polymers of the liquid roof have to set before they can bond with your existing roof. If there are impurities (dirt, debris, grime) that come between the liquid roof and the EPDM roofing, then the polymers will fail to bond. While a repair made in this manner might work for a short time, you’re ultimately going to discover that making this mistake will cause more harm than good.

Also, when you spread the liquid roof on your RV, you’re going to need to make sure that you’re spreading it in an even coat. If you allow the liquid roof coating to become uneven in places, it’s seriously going to degrade the integrity of the repair. If that happens, you’re going to be back up on a ladder making further repairs before you even have a chance to rest from the last round of repairs.

RV Roof Repair is Incredibly Simple

As long as you avoid these potential pitfalls, you’re sure to find repairing your RV’s roofing system to be easy. After you’ve made a successful application of the liquid roof, you’re only going to have to wait 24 hours for it to set. After that, you should be able to take to the open road again.

Of course, RV roof repair with liquid roof can be even easier if you hire a licensed and reputable contractor. This will be a particularly good option if you don’t feel that you’re handy enough to make the repairs yourself, and that you might find yourself making some of the mistakes that were mentioned earlier. Regardless, you’re sure to find hiring a contractor to make the repairs eminently affordable, so there should be no excuse for delaying in making your RV leaks repairs!

How to Repair and Restore RV Roof?

Are you worried about the efficiency of repairing and restoring of RV roofs? Well, you need not get too worried because there are ways you can adopt to successfully accomplish RV roof repair. Before you go ahead with repairing and restoring work, you need to make sure that a few things are done properly. Some of these steps include determining if the roof is fiber glass, aluminum, rubber or steel sheeting. Make sure you have measured all seams accurately including cross seams, pipes, air conditioners, all vents and outside edges. Cover the seams properly with a tape before you apply coating RV roof repair.

Before you start the actual RV roof repair work, scrub the rubber surface with the help of a deck brush or pressure wash, detergent and warm water. Be careful with sagging and lower areas of the roof and push off all the remaining extra water with a small hand brush. This will also let you easily brush off old roof patch material and remaining debris. Here, you have to remove the sealants and loose coatings which may not be adhering to the roof. After this, clean it properly and let it dry. After having this done, apply the tape to all the seams and make sure the tape is well placed.

Now you have to use a leak stopper, so opt for the brand which has a reputation for RV roof repair. A good leak stopper must seep deep down into the crevices and cracks to form a special bond with the roof and make a permanent seal. During the rebuilding process, it’s advisable to wear protective clothing and disposable gloves. You may also use an old and disposable metal trowel or paintbrush for the purpose of spreading and evenly covering every seam. Be sure that you have done it properly and cover almost an inch additional space on either side of the seam. The spaces around air conditioners, vents, and antennas etc are more vulnerable to cracks and seems, so seal them as well.

Remember, these spaces are the actual problem areas which you may easily ignore until it is too late. It is these complex areas which leak very slowly and worse thing is that they stay hidden. You can afford to spread the sealer very thin, but ensure you spread it wide over every seam. In order to be 100% sure that you have covered all the seams, it is wise to spread the sealer around and beyond the actual cracks and seams. Remember, though the seams and cracks which have already surfaced need attention, the problem areas are also equally important to cover for an effective RV roof repair and restoration.

If the tears are too large, try out some fiberglass repair tape and spread your selected roof repair tar covering the whole area which needs to be patched. Lay the fiberglass screen over these holes and spread a little more of the RV roof patching tar on top of this tape, which should cover it completely. This will help you complete the process of RV roof repair successfully and productively for a long time.