Your RV is a Big Investment
After your house, your RV is perhaps the biggest investment that you will ever make. It’s your home away from home when you’re on the road, and just like your house, you want your RV to be clean, comfortable and trouble-free. Regular inspection and maintenance play a big part in keeping it that way. The single biggest factor in keeping your coach in good shape is the condition of the roof. An RV roof is subject to the worst that Mother Nature has to offer; rain, sleet, snow, hail, and wind; the list goes on and on. Over time, the integrity of the roof’s surface deteriorates and small defects will appear. If left untreated, these seemingly minor flaws can develop into much bigger damage which will spread to other parts of the RV and compromise the structural integrity of the unit. Detecting and fixing problem areas of the roof when they first appear by using an RV liquid roof treatment can help ensure that you will enjoy many years of trouble-free camping.
Perform Regular Inspections
Thoroughly inspect the surface of your RV roof at the beginning and end of each season. If you’re using your coach for extended periods of time, a monthly inspection is warranted. If you don’t feel comfortable going up on the roof yourself, it is best to hire a professional. Look for minor cracks or splits in the roof’s surface. Inspect around the outside seams, taking special note of any separations. Check around all roof vents, antennae and the air conditioning unit. Are there any splits in the caulking? Does it appear to be pealing? Take your time when doing the inspection and never adopt the attitude that a problem isn’t that bad, that it can wait. Any defect in the integrity of the roof will only get worse over time. The sooner the problems are addressed, the easier and less expensive they’ll be to fix. After you’ve identified the areas that need to be treated with an RV liquid roof treatment, it’s time to prepare the surface.
Preparing the Problem Areas
Before you can apply an RV liquid roof treatment, the roof must be prepped. Start with a thorough cleaning of the surface. All loose dirt and debris must be swept or blown off of the roof. Next, thoroughly scrub the surface of the roof. You can use regular soaps as long as they don’t contain any petroleum or citrus products. It’s extremely important to thoroughly rinse the soaps and cleaning solutions, as any remaining residue can keep the RV liquid roof treatment from adhering properly.
Choose the RV Liquid Roof Treatment That’s Right for You
It is recommended that you use RV liquid roof treatment for a number of reasons. After several years, the surface of the roof isn’t going to be perfectly flat, especially if any repairs have been made to it. A liquid will fill in and coat even the smallest splits, cracks and defects. Also, a liquid will cover and coat any raised surface areas like repair sites, the caulking around the base of vents and antennae, or the lip around the roof’s edge. If you’re only sealing smaller repair areas, be sure to overlap the edge of the repair by about 3 inches. Lastly, because repair and prep work can be time intensive, you’ll be wise to use an RV liquid roof treatment that only requires one coat. It’ll save you hours of time that would otherwise be spent waiting for a first coat to dry.